Relay Check
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Remove the LIN cutoff control unit. Refer to LIN CUTOFF CONTROL UNIT REMOVAL AND INSTALLATION .
RELAY CHECK
| Battery Voltage | Terminal No. | Normal Condition |
|---|---|---|
| At no energization | 5 & 7 | No Continuity |
| With current supply (terminal 1 (+), terminal 8 (-) | 5 & 7 | Continuity Exists (2 ohms or less) |