LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Manual Transaxle Overhaul - Lancer Evolution) >> Transfer >> Disassembly And Assembly >> Assembly Service Point >> >>C<< Oil Seal Installation

>>C<< Oil Seal Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tool MD998550, to install the oil seal.
  2. Apply specified grease to the oil seal lip area.

    Specified grease: Retinax A 

    Fig 1: Installing Oil Seal Using Special Tool MD998550
    G05903890Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.