LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Manual Transaxle Overhaul - Lancer Evolution) >> Transaxle Case >> Disassembly And Assembly >> Assembly Service Points >> >>F<< Oil Guide A Installation

>>F<< Oil Guide A Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Normally, it is not necessary to disassemble the oil guide A. Install the oil guide only when the transaxle case is replaced with a new one.

Install the oil guide A to the new transaxle case. Stake at the illustrated point to secure the oil guide in position.

Fig 1: Installing Oil Guide To Transaxle Case
G05394054Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals