Sealants And Adhesives: Transaxle
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
TRANSAXLE SPECIFICATIONS
| Item | Specified sealant |
|---|---|
| Mating face for transaxle case and clutch housing | Mitsubishi Part No. MD997740 or equivalent |
| Mating face for transaxle case and control housing | |
| Steel ball | 3M™ STUD Locking No. 4710 or equivalent |
| Center differential drive gear bolt | |
| Air breather bracket | Three bond 1501 or equivalent |