LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Manual Transaxle Overhaul - Lancer Evolution) >> Reverse Idler Gear >> Disassembly And Assembly >> Disassembly Service Points >> >>A<< Thrust Bearing Installation

>>A<< Thrust Bearing Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Install the thrust bearing as shown in illustration.

Fig 1: Thrust Bearing & Reverse Idler Gear Shaft
G06677020Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals