LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Manual Transaxle Overhaul - Lancer Evolution) >> Input Shaft >> Disassembly And Assembly >> Assembly Service Points >> >>F<< 5TH Speed Synchronizer Hub/5TH Synchronizer Sleeve Installation

>>F<< 5TH Speed Synchronizer Hub/5TH Synchronizer Sleeve Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 5th speed synchronizer hub and synchronizer sleeve in the illustrated direction.
    Fig 1: 5th Speed Synchronizer Hub & Synchronizer Sleeve Installation Direction
    G05393984Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Using the special tools, MD998812, MD998813 and MD998822, indicated below, install the 5th speed synchronizer hub and synchronizer sleeve.
  3. After installation, check that the 5th speed gear rotates smoothly.
    Fig 2: Installing 5th Speed Synchronizer Hub & Synchronizer Sleeve Using Special Tools, MD998812, MD998813 & MD998822
    G05393985Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals