LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Manual Transaxle Overhaul - Lancer Evolution) >> Control Housing >> Disassembly And Assembly >> Assembly Service Points >> >>B<< Oil Seal Installation

>>B<< Oil Seal Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using special tool, MB991246, install the oil seal.
  2. Apply specified transmission oil to the oil seal lip area.

    Specified transaxle oil: Mitsubishi Genuine DiaQueen New Multi Gear oil SAE 75W-80 (GL-3) 

    Fig 1: Installing Oil Seal Using Special Tool MB991246
    G05394032Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals