LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Front Axle - Lancer Evolution) >> Front Axle Hub Assembly >> Removal And Installation With Washer And Cotter Pin Design >> Installation Service Points >> >>A<< Knuckle And Strut Assembly Connection Bolt Installation

>>A<< Knuckle And Strut Assembly Connection Bolt Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Locate the knuckle and strut assembly upper connection bolt's marking position as shown in the illustration and tighten it.

Fig 1: Locating Knuckle & Strut Assembly Upper Connection Bolt's Marking Position
G05394490Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals