>>A<< Parking Brake Rear Cable Connection Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Check that the equalizer and the parking brake rear cable are connected correctly. If the parking brake is applied with the equalizer and the parking brake rear cable connected improperly, the equalizer may be damaged.

Connect the parking brake rear cable to the equalizer as shown in illustration.

Fig 1: Connecting Parking Brake Rear Cable To Equalizer
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Install the parking brake rear cable connection, and then tighten the floor console bracket rear mounting bolts to the specified torque.
Tightening torque: 9.5 ± 3.5 N.m (84 ± 30 in-lb)

Fig 2: Parking Brake Rear Cable Connection With Torque Specifications
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.