LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Headlight System - Lancer Evolution) >> Bracket Repair Of Headlight Assembly >> Repair Procedure Of Bracket A

Repair Procedure Of Bracket A

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cut the damaged bracket A so that it has the larger dimension than the dimension shown in the illustration from the mounting boss seating face.
  2. Smooth the bracket cut surface using the sandpaper.
    Fig 1: Identifying Headlight Assembly Bracket A Damage Area
    G05906425Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Identifying Headlight Assembly Bracket Dimension
    G05906426Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Fix the repair bracket A to the headlight assembly using the tapping screw.
    Fig 3: Fixing Repair Bracket A To Headlight Assembly Using Tapping Screw
    G05906427Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals