LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Active Skid Control System (ASC) - Lancer Evolution) >> Hydraulic Unit >> Removal And Installation >> Removal Service Points >> << A >> ASC-Ecu Wiring Harness Connector Disconnection

<< A >> ASC-Ecu Wiring Harness Connector Disconnection

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Operate the lock lever as shown in the figure to disconnect the ASC-ECU wiring harness connector.

scientia non olet · About LEMON Manuals