LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Active Skid Control System (ASC) - Lancer Evolution) >> Diagnosis >> Symptom Procedures >> Inspection Procedure 2: With the parking brake released, the brake warning light remains illuminated (ABS warning light is turned off) >> Notes

Inspection Procedure 2: With the parking brake released, the brake warning light remains illuminated (ABS warning light is turned off): Notes

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Locating Connectors C-312, A-09, C-04 And C-23, C-122
G05394698Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
CAUTION:
  • If there is any problem in the CAN bus lines, an incorrect diagnostic trouble code may be set. Prior to this diagnosis, diagnose the CAN bus lines.
  • Whenever the ECU is replaced, ensure that the communication circuit is normal.