LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Active Skid Control System (ASC) - Lancer Evolution) >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC C2002: Abnormality in valve calibration >> DTC Set Conditions

DTC Set Conditions

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

This diagnostic trouble code is set when the calibration of the cut valve or inlet valve has not been performed, or when the correction value of cut valve or inlet valve is abnormal.

scientia non olet · About LEMON Manuals