>>A<< Clutch Tube Assembly Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

When connecting each part, check that the O-ring and clip are not damaged.
If any connection area or O-ring is dirty, clean with the clutch fluid.

Assemble the clips to the clutch master cylinder and clutch tube assembly B. Then, connect the clutch tube assembly A.

Fig 1: Clutch Master Cylinder, Clip & Clutch Tube Assembly

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: O-Ring, Clip & Clutch Tube

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.