Key Reminder Switch Inspection
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
With the key reminder switch mounted to the vehicle, disconnect the key reminder switch connection connector, and then perform the continuity check.
INSPECTION CHART
| Key status |
Terminal number |
Normal condition |
| Key removed |
2 - 3 |
Continuity exists (Less than 2 ohms) |
| Key inserted |
2 - 3 |
No continuity |
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.