LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Hazard Warning Light Switch - Lancer Evolution) >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC B16A6: Turn-Signal Fuse Blown >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

With the DTC not set, when the blown fuse of hazard warning light is detected three times consecutively, the ETACS-ECU sets the DTC B16A3.

scientia non olet · About LEMON Manuals