LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Supplemental Restraint System (SRS) -- Lancer Evolution) >> Side-Airbag Module(S) >> Removal And Installation >> Removal Service Point >> << B >> Front Seatback Removal

<< B >> Front Seatback Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • When replacing the side-air bag module, replace the front seatback.
  • Never use an electric tester to diagnose the air bag module circuit. Never attempt to disassemble the air bag module.
  • Store the removed front seatback in a clean and dry place.
  • When discarding the air bag module, discard after deploying the air bag as specified in the service procedure (Refer to AIR BAG MODULE AND SEAT BELT PRE-TENSIONER DISPOSAL PROCEDURES  ).
scientia non olet · About LEMON Manuals