Passenger's (Front) Air Bag Module

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Passenger's (Front) Air Bag Module Remove/Install Components

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Required Special Tools:

MB991958 Scan Tool (M.U.T.-III Sub Assembly)
- MB991824: Vehicle Communication Interface (V. C. I).
- MB991827 M.U.T.-III USB Cable
- MB991910 M.U.T.-III Main Harness A