LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Trunk Lid - Lancer Evolution) >> Trunk Lid >> Removal And Installation >> Installation Service Point >> >>A<< Trunk Lid Weatherstrip Installation

>>A<< Trunk Lid Weatherstrip Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Install the trunk lid weatherstrip so that the marking are aligned with the body center line.

Fig 1: Identifying Trunk Lid Weatherstrip Marking Section
G05384195Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.