Trunk Lid Latch Switch Continuity Check
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
TRUNK LID LATCH SWITCH CONTINUITY CHECK
| Lever position |
Tester connection |
Specified condition |
| ON (Latch open) |
1 - 2 |
Continuity exists (2 Ω or less) |
| OFF (Latch shut) |
1 - 2 |
Open circuit |
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.