INSPECTION PROCEDURE 1: Difficult Locking And Unlocking: Diagnosis
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
- STEP 1. Check the release cable routing condition.
Q: Is the release cable routing condition good?
- YES: Go to Step 3.
- NO: Repair the release cable routing, then go to Step 2.
- STEP 2. Check the engagement of the trunk lid latch and trunk lid striker.
Q: Are the trunk lid latch and trunk lid striker engaged correctly?
- YES: Then go to Step 3.
- NO: Adjust the trunk lid striker. Refer to TRUNK LID STRIKER ADJUSTMENT .
- STEP 3. Retest the system.
Q: Does the trunk lid lock operate easily?
- YES: The procedure is complete.
- NO: Return to Step 1.