INSPECTION PROCEDURE 3: Water Leak Through Door Edge: Diagnosis

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1. Check the weatherstrip.
Q: Is the weatherstrip in good condition?
- YES: Go to Step 2.
- NO: Replace the weatherstrip, then go to Step 3.
STEP 2. Check the door fit (alignment).
Q: Is the door fit (alignment) correct?
- YES: Go to Step 3.
- NO: Adjust the door fit. Refer to DOOR FIT ADJUSTMENT . Then go to Step 3.
STEP 3. Retest the system.
Q: Is any water leaking?
- YES: Return to Step 1.
- NO: The procedure is complete.