INSPECTION PROCEDURE 2: Door Window Glass Malfunction: Diagnosis
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
- STEP 1. Check the door window glass installation condition.
Q: Is the door window glass installed correctly?
- YES: Go to Step 2.
- NO: Assemble the door window glass again. (Refer to DOOR GLASS AND REGULATOR ). Then go to Step 4.
- STEP 2. Check the door sash.
Q: Is the door sash in good condition?
- YES: Go to Step 3.
- NO: Repair or replace the door sash, then go to Step 4.
- STEP 3. Inspect the window regulator assembly.
Q: Is the window regulator assembly in good condition?
- YES: Go to Step 4.
- NO: Repair or replace the window regulator assembly, then go to Step 4.
- STEP 4. Retest the system.
Q: Does the door window glass operate correctly?
- YES: The procedure is complete.
- NO: Return to Step 1.