Diagnostic Trouble Code Chart
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
On troubleshooting, if the ignition switch is turned ON while disconnecting connector(s), diagnostic trouble code(s) associated with other system may be set. On completion, check all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.
DIAGNOSTIC TROUBLE CODE CHART
| Diagnostic trouble code No. | Diagnostic item |
|---|---|
| L0730 | P/W (DR) SW pulse1 disconnection |
| L0732 | P/W (DR) SW pulse2 disconnection |
| L0734 | P/W (DR) Above window position |
| L0736 | P/W (DR) Sensor fail (ground) |
| L0740 | P/W (DR) 3 times jam - protection |
| L0746 | P/W (DR) Parameter read fail |
| L0750 | P/W (DR) Position read fail |