LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Door System - Lancer Evolution) >> On-Vehicle Service >> Door Outside Handle Play Check

Door Outside Handle Play Check

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check that the door outside handle assembly play meets the standard value.

    Standard value (B): 0.3 - 5.0 mm (0.01 - 0.2 inch) [Target value: 2.4 mm (0.09 inch)] 

  2. Check the door outside handle assembly and door latch assembly, and replace them if they are out of the standard value.
    Fig 1: Checking Door Outside Handle Play
    G05384153Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.