LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 58 (Door System - Lancer Evolution) >> Diagnostic Trouble Code Procedures - Power Window >> CODE NO. L0746: P/W (DR) Parameter Read Fail; CODE NO. L0750: P/W (DR) Position Read Fail >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostic trouble code recheck 

Recheck if the diagnostic trouble code is set.

  1. Erase the diagnostic trouble code.
  2. Turn the ignition switch from the LOCK (OFF) position to the ON position.
  3. Check if the diagnostic trouble code is set.

    Q: Is the diagnostic trouble code set? 

    • YES:  Replace the power window main switch.
    • NO:  The procedure is complete. Verify that the power window works normally.
scientia non olet · About LEMON Manuals