Service Specifications
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATIONS
| Item | Standard value | Limit | |
|---|---|---|---|
| Steering wheel free play mm (in) | With engine running | - | 30 (1.2) or less |
| With engine stopped | 16.5 (0.65) or less | - | |
| Steering angle | Inner wheel | 33°10' ± 1°30' (Left/right deviation within 2°00') | - |
| Outer wheel (reference value) | 28°10' | - | |
| Toe-in mm (in) | 0 ± 2 (0 ± 0.08) | - | |
| Tie-rod looseness mm (in) | Within ± 2.0 (0.08) | - | |
| Tie rod end ball joint breakaway torque N.m (in-lb) | 2.9 (26) or less | - | |
| Engine idle speed r/min | 700 ± 100 | - | |
| Stationary steering effort N (lb) [Fluctuation allowance N (lb)] | 32 (7.2) or less [5.9 (1.33) or less] | - | |
| Oil pump pressure MPa (psi) | Oil pump relief pressure | 8.1 - 8.8 (1, 175 - 1, 276) | - |
| Pressure under no-load conditions | 1.0 (145) | - | |
| Steering gear retention hydraulic pressure | 8.1 - 8.8 (1, 175 - 1, 276) | - | |
| Oil pressure switch operating pressure MPa (psi) | OFF → ON | 2.5 - 3.0 (363 - 435) | - |
| ON → OFF | 1.5 - 3.0 (218 - 435) | - | |
| Steering gear total pinion torque N.m (in-lb) [Change in torque N.m (in-lb)] | 0.6 - 1.6 (5.3 - 14.2) [0.4 (3.5) or less] | - | |
| Band crimped width mm (in) | 2.4 - 2.8 (0.09 - 0.11) | - | |