INSPECTION PROCEDURE 11: Oil Leakage From Hose Assembly: Diagnosis

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

STEP 1. Check the hose for damage or clogging.
Q: Is the hose damaged or clogged?
- YES: Replace it (Refer to POWER STEERING HOSES ). Then go to Step 2.
- NO: Go to Step 2.
STEP 2. Retest the system.
Check that no oil is leaking.

Q: Is there oil leakage?
- YES: Repeat from Step 1.
- NO: The procedure is complete.