LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Combination Meter - Lancer Evolution) >> Troubleshooting >> Actuator Test Table >> Actuator Test

Actuator Test

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
ACTUATOR TEST CHART

Item No. Item name Test item Driven content or unit
1(1) Speedometer Pointer setting -
2 Tachometer Pointer setting r/min
3 Fuel gauge Status setting ohm
5 Meter illumination Status setting %
7 Indicator1 By turning ON/OFF the item values, indicators can be illuminated/extinguished and tone alarm can be sounded. ON/OFF
8 Indicator2 ON/OFF
9 Indicator3 ON/OFF
10 Indicator4 ON/OFF
(1) Depending on the main scale of the speedometer, the unit that can be tested changes. Unit is displayed as "-" on the scan tool MB991958 screen.

TEST (SPECIAL FUNCTION)

ACTUATOR TEST CHART

Item No. Item name Test content
2 LCD (AUTO) The display screen will be changed in the following order.
  1. A black full screen is displayed.
  2. The version information is displayed.
  3. A white full screen is displayed.
  4. A screen with black and white gradation is displayed.
3 Buzzer (AUTO) The tone alarm sounds.
scientia non olet · About LEMON Manuals