Tachometer Check
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
When the actuator tests (item No. 2) are performed using scan tool MB991958, check that the tachometer indication tolerance is within the standard value.
NOTE:
Values in () indicates the reference value.
Standard value:
ENGINE SPEED CHART
| Engine speed (r/min) | Indication tolerance (r/min) |
|---|---|
| 600 | 550 - 650 |
| (2, 000) | (1, 950 - 2, 050) |
| 3, 000 | 2, 950 - 3, 050 |
| (4, 000) | (3, 950 - 4, 050) |
| 5, 000 | 4, 950 - 5, 050 |
| 6, 000 | 5, 950 - 6, 050 |
| (7, 000) | (6, 950 - 7, 050) |
| (8, 000) | (7, 950 - 8, 050) |