LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Active Stability Control System (ASC) - Lancer Evolution) >> Diagnosis >> Symptom Procedures >> Inspection Procedure 6: The ASC Warning Display Stays ON Even After The Engine Is Started >> System Operation

System Operation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

ASC-ECU sends the illumination request signal of ASC warning display to the combination meter through ETACS-ECU via CAN communication.

scientia non olet · About LEMON Manuals