LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (Active Stability Control System (ASC) - Lancer Evolution) >> Diagnosis >> Symptom Procedures >> Inspection Procedure 3: The ABS Warning Light Does Not Illuminate When Ignition Switch Is Turned To The ON Position (Engine Stopped) >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

In the case of this trouble symptom, there may be a malfunction to the CAN bus line, ETACS-ECU, combination meter, or ASC-ECU.