Service Specifications
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
SERVICE SPECIFICATION
| Item | Standard value | Limit |
|---|---|---|
| Rear axle total backlash mm (in) | - | 6 (0.2) |
| Wheel bearing end play mm (in) | - | 0.05 (0.002) |
| Wheel bearing rotation starting torque N.m (in-lb) | - | 1.4 (12.39) |
| ETJ boot assembly dimension mm (in) | 80 ± 3 (3.1 ± 0.1) | - |
| Hydraulic pressure of hydraulic unit (under forced activation) MPa (psi) | 0.9 - 1.1 (130 - 159) | - |