Differential Mechanism Part
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Required Special Tools:
- MB991245: Lower arm bush ring
- Remove the driveshaft. (Refer to DRIVESHAFT ASSEMBLY ).
- Remove the AYC differential carrier oil seal.
- Use special tool MB991245 to press-fit a new oil seal.
- Apply multi-purpose grease to the oil seal lip and driveshaft oil seal seating area.
- Replace the driveshaft circlip with a new one, and install the driveshaft to the differential carrier. (Refer to DRIVESHAFT ASSEMBLY ).