>>C<< Turbocharger Bracket/Turbocharger Bracket And Turbocharger Assembly Coupling Bolt Installation
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
- Check that the turbocharger bracket is in close contact with the turbocharger assembly and with the cylinder block, and then temporarily tighten the turbocharger bracket.
- Tighten the bolt of the cylinder block side to the specified torque.
Tightening torque: 51 ± 7 N.m (38 ± 5 ft-lb)
- Tighten the turbocharger bracket and the turbocharger assembly coupling bolt to the specified torque.
Tightening torque: 64 ± 5 N.m (48 ± 3 ft-lb)