LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Intake System And Exhaust System - Lancer Evolution) >> Exhaust Manifold And Turbocharger >> Removal And Installation >> Installation Service Points >> >>A<< Turbocharger Installation

>>A<< Turbocharger Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the turbocharger oil feed tube, turbocharger water feed pipe and turbocharger water return pipe fitting, the inside of eye bolts, and individual pipe for clogs.
    CAUTION: Take care not to allow foreign objects to get into the turbocharger.
  2. Clean or use compressed air to remove any carbon particles stuck to the oil passage of the turbocharger.
  3. Refill new engine oil at the turbocharger oil feed tube fitting hole of the turbocharger.
scientia non olet · About LEMON Manuals