LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 47 (Intake System And Exhaust System - Lancer Evolution) >> Exhaust Manifold And Turbocharger >> Inspection >> Exhaust Manifold Check

Exhaust Manifold Check

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the exhaust manifold for damage and cracks, and replace it if necessary.
  2. Using a straight edge and a thickness gauge, check for distortion of the cylinder head and turbocharger installation surface. If it exceeds the limit value, replace it.

    Limit <Cylinder head assembly side>: 0.70 mm (0.028 inch) 

    Limit <Turbocharger assembly side>: 0.40 mm (0.016 inch) 

scientia non olet · About LEMON Manuals