LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 44 (Engine Cooling System - Lancer Evolution) >> Thermostat >> Removal And Installation >> Installation Service Points >> >>B<< Radiator Lower Hose Connection

>>B<< Radiator Lower Hose Connection

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert the radiator lower hose as far as the projection of the cooling water inlet hose fitting.
  2. Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.
    Fig 1: Identifying Mating Marks On Radiator Hose & Hose Clamp
    G06468553Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals