LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Interior - Lancer Evolution) >> Seat Belt >> Inspection >> Seat Belt Buckle Switch Continuity Check (Driver's Side)

Seat Belt Buckle Switch Continuity Check (Driver's Side)

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
SEAT BELT BUCKLE SWITCH CONTINUITY REFERENCE CHART

Item Tester connection Specified condition
Fastened seat belt 1 - 2 Open circuit
Unfastened seat belt 1 - 2 Continuity exists (2Ω or less)
Fig 1: Checking Seat Belt Buckle Switch Continuity (Driver's Side)
G05396081Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.