LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 43 (Interior - Lancer Evolution) >> Seat Assembly >> Front Seat Assembly >> Installation Service Point >> >>A<< Front Seat Assembly Installation

>>A<< Front Seat Assembly Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Temporarily tighten the bolts in all mounting locations shown in the illustration with no load applied to the front seat cushion and check the operation of the seat slide.
  2. Tighten the bolts in all mounting locations to the specified torque.
    Fig 1: Locating Front Seat Assembly Bolts
    G05396068Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals