LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Engine Mechanical - Lancer Evolution) >> Timing Chain >> Removal And Installation >> Installation Service Points >> >>E<< Water Pump Pulley Installation

>>E<< Water Pump Pulley Installation

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Temporarily tighten the water pump pulley mounting bolts. Then, tighten them to the specified torque after the installation of drive belt.

Tightening torque: 9.0 ± 1.0 N.m (80 ± 9 in-lb) 

scientia non olet · About LEMON Manuals