Sealants And Adhesive
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
ITEM SPECIFICATION
| Item | Specified sealant | Remark |
|---|---|---|
| Rocker cover assembly (matching area of the cylinder head and the timing chain case) | ThreeBond 1227D, ThreeBond 1217G (Mitsubishi Genuine Part No. 1000A923), LOCTITE 5900 or equivalent | Semi-drying sealant |
| Engine oil pan | ThreeBond 1227D, ThreeBond 1217G (Mitsubishi Genuine Part No. 1000A923), ThreeBond 1207F (Mitsubishi Genuine Part No. 1000A992), LOCTITE 5970, LOCTITE 5900 or equivalent | |
| Flywheel bolt | Three bond 1324 equivalent | Anaerobic adhesive |
| Crankshaft rear oil seal case | ThreeBond 1227D, ThreeBond 1217G (Mitsubishi Genuine Part No. 1000A923), ThreeBond 1207F (Mitsubishi Genuine Part No. 1000A992), LOCTITE 5970, LOCTITE 5900 or equivalent | Semi-drying sealant |
| Cylinder head gasket (matching area of the cylinder head, cylinder head gasket and the cylinder block) | Three bond 1217G (Mitsubishi Genuine Part No. 1000A923), LOCTITE 5900 or equivalent | |
| Timing chain case assembly |