LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Electronic Time And Alarm Control System (ETACS) - Lancer Evolution) >> Troubleshooting >> Input Signal Procedures >> Inspection Procedure 8: ETACS-ECU Does Not Receive Any Signal From The Rear Door Switch (RH) >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

If there is an error to the rear door switch (RH) input signal, the rear door switch (RH) signal is no longer output to the communication line.