LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Cooling - Lancer Evolution) >> Water Hose And Water Pipe >> Removal And Installation >> Removal Service Points >> << C >> Engine Coolant Temperature Sensor Removal

<< C >> Engine Coolant Temperature Sensor Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Use special tool MB992042 to remove the engine coolant temperature sensor.

Fig 1: Identifying Special Tool MB992042 And Engine Coolant Temperature Sensor
G05393638Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.