| Scan tool cannot communicate with KOS-ECU. |
Refer to INSPECTION PROCEDURE 1: SCAN TOOL CANNOT COMMUNICATE WITH KOS-ECU. |
| The keyless operation key cannot be registered using scan tool. |
Refer to INSPECTION PROCEDURE 2: THE KEYLESS OPERATION KEY CANNOT BE REGISTERED USING SCAN TOOL. |
| Abnormality in KOS-ECU power supply and ground circuits. |
Refer to INSPECTION PROCEDURE 3: ABNORMALITY IN KOS-ECU POWER SUPPLY AND GROUND CIRCUITS |
| Keyless operation warning display does not disappear. |
Refer to INSPECTION PROCEDURE 4: KEYLESS OPERATION WARNING DISPLAY DOES NOT DISAPPEAR. |
| IG knob will not turn (keyless operation is not recognized). |
Refer to INSPECTION PROCEDURE 5: IG KNOB WILL NOT TURN (KEYLESS OPERATION IS NOT RECOGNIZED). |
| The engine will not start with KOS (IG knob operates normally). |
Refer to INSPECTION PROCEDURE 6: THE ENGINE WILL NOT START WITH KOS (IG KNOB OPERATES NORMALLY). |
| Engine does not start with emergency key (cranking but no initial combustion). |
Refer to INSPECTION PROCEDURE 7: ENGINE DOES NOT START WITH EMERGENCY KEY (CRANKING BUT NO INITIAL COMBUSTION). |
| No door will be locked or unlocked by operating a lock switch on any door, or by touching the unlock sensor. |
Refer to INSPECTION PROCEDURE 8: NO DOOR WILL BE LOCKED OR UNLOCKED BY OPERATING A LOCK SWITCH ON ANY DOOR, OR BY TOUCHING THE UNLOCK SENSOR. |
| Driver's door lock/unlock switch does not work. |
Refer to INSPECTION PROCEDURE 9: DRIVER'S DOOR LOCK SWITCH DOES NOT WORK. |
| Front passenger's door lock/unlock switch does not work. |
Refer to INSPECTION PROCEDURE 10: FRONT PASSENGER'S DOOR LOCK SWITCH DOES NOT WORK. |
| Trunk lid opener switch does not work. |
Refer to INSPECTION PROCEDURE 11: TRUNK LID OPENER SWITCH DOES NOT WORK. |
| Keyless entry system does not work. |
Refer to INSPECTION PROCEDURE 12: KEYLESS ENTRY SYSTEM DOES NOT WORK. |
| KOS timer lock function does not work. |
Refer to INSPECTION PROCEDURE 13: KOS TIMER LOCK FUNCTION DOES NOT WORK. |
| Keyless entry hazard light answerback function, the dome light answerback function or the horn answerback function does not work normally. |
Refer to INSPECTION PROCEDURE 14: KEYLESS ENTRY HAZARD LIGHT ANSWERBACK FUNCTION, THE DOME LIGHT ANSWERBACK FUNCTION OR THE HORN ANSWERBACK FUNCTION DOES NOT WORK NORMALLY. |
| The trunk is not opened when the keyless operation key "TRUNK" button is operated. |
Refer to INSPECTION PROCEDURE 15: THE TRUNK IS NOT OPENED WHEN THE KEYLESS OPERATION KEY "TRUNK" BUTTON IS OPERATED. |
| Outer tone alarm does not sound. |
Refer to INSPECTION PROCEDURE 16: OUTER TONE ALARM DOES NOT SOUND. |
| Power door locks with selective unlocking does not work. |
Refer to INSPECTION PROCEDURE 17: POWER DOOR LOCKS WITH SELECTIVE UNLOCKING DOES NOT WORK. |