LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Supplemental Restraint System (SRS) - Lancer Evolution) >> Side Impact Sensor >> Removal And Installation >> Installation Service Points >> >>A<< Pre-Installation Inspection

>>A<< Pre-Installation Inspection

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Check the side impact sensor for dents, breakage and bending and measure the resistance between the terminals, even when installing a new side impact sensor.

scientia non olet · About LEMON Manuals