Trouble Symptom Chart
WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
During diagnosis, a DTC code associated with another system may be set when the ignition switch is turned on with connector(s) disconnected. After completing the repair, confirm all systems for DTC code(s). If DTC code(s) are set, erase them all.
TROUBLE SYMPTOM CHART
| Symptom | Inspection procedure |
|---|---|
| Communication between the scan tool and the SRS-ECU is not possible. | Refer to INSPECTION PROCEDURE 1: COMMUNICATION BETWEEN THE SCAN TOOL AND THE SRS-ECU IS NOT POSSIBLE. |
| Power supply circuit system | Refer to INSPECTION PROCEDURE 2: POWER SUPPLY CIRCUIT SYSTEM |
| The SRS warning light does not illuminate. | Refer to INSPECTION PROCEDURE 3: THE SRS WARNING LIGHT DOES NOT ILLUMINATE. |
| The SRS warning light does not go out. | Refer to INSPECTION PROCEDURE 4: THE SRS WARNING LIGHT DOES NOT GO OUT. |