LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 37 (Supplemental Restraint System (SRS) - Lancer Evolution) >> Post-Collision Diagnosis >> Repair Procedure >> Steering Wheel, Steering Column And Shaft Assembly

Steering Wheel, Steering Column And Shaft Assembly

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check the wiring harness (built into the steering wheel) and the connectors for damage, and the terminals for deformation.
    Fig 1: Inflator
    G06676394Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Install the air bag module to check fit or alignment with the steering wheel.
  3. Check the steering wheel for noise, binding or difficult operation and excessive free play.
  4. Check the steering column shaft shock absorbing mechanism (Refer to STEERING COLUMN SHAFT ASSEMBLY SHOCK ABSORBING MECHANISM CHECK ).
scientia non olet · About LEMON Manuals