LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 35 (Controller Area Network (Can) - Lancer Evolution) >> Diagnosis >> Can Bus Diagnostics >> DIAGNOSTIC ITEM 25: Diagnose The ETACS-ECU, Joint Connector (CAN1) Or Lines Between ETACS-ECU And Joint Connector (CAN1) >> Function

DIAGNOSTIC ITEM 25: Diagnose The ETACS-ECU, Joint Connector (CAN1) Or Lines Between ETACS-ECU And Joint Connector (CAN1): Function

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

If a failure is present in the wiring harness wires between the ETACS-ECU connector, the joint connector (CAN1), the ETACS-ECU connector and the joint connector (CAN1), this diagnosis result will be set.

scientia non olet · About LEMON Manuals