LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (General - Lancer Evolution) >> Towing And Hoisting >> Lifting, Jacking Support Location >> Floor Jack And Rigid Rack

Floor Jack And Rigid Rack

WARNING: This page is about a different car, the 2012 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Never place a support at any point other than the specified one, or that point will be deformed.
  • For lifting, put rubber or similar material between the side sill and rigid rack, otherwise the side sill area will be damaged.

FLOOR JACK 

Fig 1: Identifying Lifting, Jacking Support Location
G05392245Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals